Problema con qtparted
 

Ragazzi ho un problema con qtparted: qquando provo a ridimensionare una partizione "archivio" di cui parlavo prima mi dice "ntfs_mount failed: invalid argument".. che fare?


La discussione che è a monte di questa la trovate qui

ricorda cmq di fare una copia di bkup dei cati prima di utilizzare qtparted.

HO trovato questo...ma e' in francese..:


ntfsresize ne trouve pas de NTFS sur la partition en question


# ntfsresize --info --force /dev/hdc1
ntfsresize v1.7.1
ERROR(22): ntfs_mount failed: Invalid argument
Apparently device '/dev/hdc1' doesn't have a valid NTFS. Maybe you selected
the whole disk instead of a partition (e.g. /dev/hda, not /dev/hda1)?



La raison de cela peut être une ou plusieurs des suivantes

le secteur de départ (cylindre) de la partition n'est pas correctement spécifié pendant la re-partition

Si vous avez fait cette faute, re-créez le départ de la partition avec la valeur originale et tout redeviendra OK. N'oubliez pas de régler le type de partition sur 7 et le flag bootable.

Si un outil de partition utilisant ntfsresize fait cette faute, alors dites-le à l'auteur concerné.

Dans tous les cas, si vous avez sauvegardé la table de partition originale, alors TestDisk, gpart ou Parted's rescue mode devrait vous aider à retrouver le secteur de démarrage (cylindre) correct dans le volume NTFS.

L'outil de partition a affecté à la partition NTFS originale un nouveau numéro.

Utilisez 'fdisk -1 device' pour trouver où est l'emplacement courant.



http://mlf.linux.rulez.org/mlf/ezaz/ntfsresize-fr.html

ma partinfo di PM non sei riuscito a usarlo, come ti avevo suggerito?
almeno per capire di che tipo di errore si tratta nella tabella delle partizioni.

si vero.. ecco:

PowerQuest PartitionInfo 8.0 -- Windows NT/2000 Version
Date Generated: 05/05/04 22:35:54
Copyright (c)1994-2002, PowerQuest Corporation
Permission is granted for this utility to be freely copied so long
as it is not modified in any way. All other rights are reserved.

PowerQuest, makers of PartitionMagic(r), Drive Image(tm), and DriveCopy(tm), can be reached at:
Voice: 801-437-8900
Fax: 801-226-8941
Web site: http://www.powerquest.com/support/
E-mail: magic@powerquest.com

General System Information:
Total Physical Memory (bytes): 536,330,240
Used Physical Memory: (bytes): 170,274,816
Maximum Page File Size: (bytes): 1,311,076,352
Current Page File Size: (bytes): 140,767,232



================================================== ================================================== =======
Disk Geometry Information for Disk 1: 7299 Cylinders, 255 Heads, 63 Sectors/Track
System PartSect # Boot BCyl Head Sect FS ECyl Head Sect StartSect NumSects
================================================== ================================================== =======
0 0 80 0 1 1 07 1019 254 63 63 16,386,237
0 1 00 1020 12 1 0F 1023 254 63 16,387,056 100,871,379
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
0 1 00 1020 12 1 0F 7298 254 63 16387056 100871379
Info: Partition didn't begin on head boundary.
ucBeginHead expected to be 0 or 1, not 12.
16,387,056 0 00 1023 15 63 83 1023 15 63 16,387,119 8,176,833
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
16387056 0 00 1020 13 1 83 1529 8 63 16387119 8176833
Info: Partition didn't begin on head boundary.
ucBeginHead expected to be 0 or 1, not 13.
Info: Partition didn't end on cylinder boundary.
ucEndHead expected to be 254, not 8.
16,387,056 1 00 1023 248 1 05 1023 15 63 30,731,904 86,526,531
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
16387056 1 00 1912 248 1 05 7298 254 63 30731904 86526531
Info: Partition didn't begin on head boundary.
ucBeginHead expected to be 0 or 1, not 248.
30,731,904 0 00 1023 1 1 07 1023 15 63 30,732,408 86,526,027
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
30731904 0 00 1913 1 1 07 7298 254 63 30732408 86526027
30,731,904 1 00 1023 9 1 05 1023 15 63 24,563,952 1,023,120
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
30731904 1 00 1529 9 1 05 1592 183 63 24563952 1023120
Info: Partition didn't begin on head boundary.
ucBeginHead expected to be 0 or 1, not 9.
Info: Partition didn't end on cylinder boundary.
ucEndHead expected to be 254, not 183.
Error #120: Logical Drive chain extends toward start of drive.
SWAPSPACE2 24,563,952 0 00 1023 15 63 82 1023 15 63 24,564,015 1,023,057
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
24563952 0 00 1529 10 1 82 1592 183 63 24564015 1023057
Info: Partition didn't begin on head boundary.
ucBeginHead expected to be 0 or 1, not 10.
Info: Partition didn't end on cylinder boundary.
ucEndHead expected to be 254, not 183.
24,563,952 1 00 1023 184 1 05 1023 15 63 25,587,072 5,144,832
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
24563952 1 00 1592 184 1 05 1912 247 63 25587072 5144832
Info: Partition didn't begin on head boundary.
ucBeginHead expected to be 0 or 1, not 184.
Info: Partition didn't end on cylinder boundary.
ucEndHead expected to be 254, not 247.
25,587,072 0 00 1023 15 63 83 1023 15 63 25,587,135 5,144,769
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
25587072 0 00 1592 185 1 83 1912 247 63 25587135 5144769
Info: Partition didn't begin on head boundary.
ucBeginHead expected to be 0 or 1, not 185.
Info: Partition didn't end on cylinder boundary.
ucEndHead expected to be 254, not 247.



================================================== ================================================== =======
Partition Information for Disk 1: 57,255.1 Megabytes
Volume PartType Status Size MB PartSect # StartSect TotalSects
================================================== ================================================== =======
C: NTFS Pri,Boot 8,001.1 0 0 63 16,386,237
ExtendedX Pri 49,253.6 0 1 16,387,056 100,871,379
EPBR Log 3,992.6 None -- 16,387,056 8,176,896
Linux Ext3 Log 3,992.6 16,387,056 0 16,387,119 8,176,833
EPBR Log 499.6 30,731,904 1 24,563,952 1,023,120
*:SWAPSPACE2 Linux Swap Log 499.5 24,563,952 0 24,564,015 1,023,057
EPBR Log 2,512.1 24,563,952 1 25,587,072 5,144,832
Linux Ext3 Log 2,512.1 25,587,072 0 25,587,135 5,144,769
EPBR Log 42,249.3 16,387,056 1 30,731,904 86,526,531
D: NTFS Log 42,249.0 30,731,904 0 30,732,408 86,526,027
Error #114: Logical starting at 30732408 is not one head away from EPBR.


================================================== ================================================== =======
Boot Record for drive C: (Drive: 1, Starting sector: 63, Type: NTFS)
================================================== ================================================== =======
1. Jump: EB 52 90
2. OEM Name: NTFS
3. Bytes per Sector: 512
4. Sectors per Cluster: 8
5. Reserved Sectors: 0
6. Number of FATs: 0
7. Root Dir Entries: 0
8. Total Sectors: 0
9. Media Descriptor: 0xF8
10. Sectors per FAT: 0
11. Sectors per Track: 63 (0x3F)
12. Number of Heads: 255 (0xFF)
13. Hidden Sectors: 63 (0x3F)
14. Total Sectors (>32MB): 0 (0x0)
15. Unused: 0x80008000
16. Total NTFS Sectors: 16386236
17. MFT Start Cluster: 786432
18. MFT Mirror Start Clust: 1024139
19. Clusters per FRS: 246
20. Clusters per Index Blk: 1
21. Serial Number: 0x3C006D3E006CFFEE
22. Checksum: 0 (0x0)
23. Boot Signature: 0xAA55

================================================== ================================================== =======
Boot Record for drive *: (Drive: 1, Starting sector: 16,387,119, Type: Ext3)
================================================== ================================================== =======
Ext3 file system super block:
1. Inodes count: 512000
2. Blocks count: 1022104
3. Reserved blocks count: 51105
4. Free blocks count: 513264
5. First data block: 0
6. Logical block size: 2
7. Logical fragment size: 2
8. Blocks/group: 32768
9. Fragments/group: 32768
10. Inodes/group: 16000
11. Mount time: 0x40994F0D
12. Last write time: 0x40994FC2
13. Mount count: 15
14. Max. mount count: -1
15. Magic number: EF53
16. State: 0x0001
17. Error behavior: 0x0001
18. Minor revision level: 0
19. Last check time: 0x40950AFE
20. Max. time bet. checks: 0
21. Creator oper. system: 0
22. Major revision level: 1
23. Reserved block def. UID:0x0000
24. Reserved block def. GID:0x0000

uff esce tutto sballato qui.. allego il txt

eccolo ^_^"

il francese nn lo capisco :'(

vedi tutti gli errori tipo questo:

Info: Partition didn't begin on head boundary.
ucBeginHead expected to be 0 or 1, not 13.

hai la tabella delle partizioni incasinatissima, ne ho contati 8.
Per correggerla dovresti usare questo:
http://www.stud.uni-hannover.de/user/76201/gpart/

oppure Ranish Partition Manager ( www.ranish.com), ma attenzione perchè rischi di perdere tutto il contenuto del tuo HD.

Inoltre leggi qui:

http://www.openlabs.it/sections.php?...ticle&artid=45

Io fossi in te farei un bel backup dei dati e azzererei l'HD, MBR compreso, quindi una scrittura a 0, e poi reinstallerei tutto.

penso seguirò il tuo ultimo consiglio.. un bel formattone e sistemo tutto..

devo installare windows XP e Mandrake 10 che mi consigliate di fare?

meglio installarli su due partizioni diverse o delegare Mandrake di riservarsi un cantuccio nella partizione con XP?

La mia configurazione hardware la leggete a pie di post, che mi consigliate di fare per quanto riguarda lo swap ecc ecc? quanto riservare a ciascuna partizione creata da linux?

NB oltre ai due sistemi operativi ho bisogno di avere sull'HD una partizione di "archivio" di grandezza massima possibile: avrei intenzione di riservare il meno possibile a linux, 15 a windows e il resto all'archivio

In generale e' meglio che te ne occupi tu, partiziona il disco considerando che per mandrake sarebbe meglio:

- dai 3 ai 4 Gb per la partizione /
- circa 500Mb per la partizione di swap
- quanto vuoi tu per la partizione /home -> documenti personali, desktop etc etc

attenzione perchè il format non risolve.
nel tuo caso devi riscrivere il MBR e tutte le tabelle.
perciò ti consiglio di scaricarti la tool della maxtor (powermax) e scrivere a 0 l'HD, in caso contrario rischi di stare punto e a capo.

ehm.. il powermax non mi visualizza l'hd..