PDA

Visualizza versione completa : Tweak Utility & Beta Bios for SiS746/746FX/748


Giorgius
05-10-2003, 11.14.40
N.B.: -> SOLO PER ESPERTI <- ;)


Effetti:
CheepoMemTweak is a utility for SiS746/746FX/748 based motherboards, meant to tweak chipset and memory performance settings under windows and/or on windows startup.

Despite actually being high performance chipsets, SiS746/746FX/748 have only found their way to the market in the form of low cost motherboards. Often that means low performance bios with little control over chipset and memory performance settings. Motherboard reviews often mention CAS Latency or RAS Precharge, but that's only the tip of the iceberg. There are literally dozens of parameters that, when properly tuned, can boost performance quite noticeably, near NForce2 levels.

The optimum settings are different for each memory chip brand and type. Ideally, they would be stored in the memory stick's SPD eeprom, so that the bios can read them and set the chipset accordingly. However, in the real world the settings in the SPD are typically quite conservative, but the main problem that often they're badly programmed too. So often bios programmers would opt for keeping it as simple and compatible as possible, not reading the SPD at all and using standard settings known to be stable with major brand modules.


Download:
Mirror: http://www.ocworkbench.com/2003/cheepoman/cheepomemtweak005.zip

Con il beneficio del dubbio che possa funzionare anche con il precedente chipset Sis735.

Giorgius
05-10-2003, 14.19.37
N.B.: -> ESCLUSIVAMENTE PER ESPERTI <- ;)


Bios moddati, "non ufficiali" x Asrock K7S8X/K7S8XE/K7S8XE+:


- ASRock K7S8X Bios 2.20AG / 2.20AGL
2.20AG / 2.20AGL: K7S8X Cool!BIOS 2.20a by honey X & guni (based on 2.20a Beta Performance)
G = Geekster BIOS
GL = Geekster BIOS with Full Screen Logo
1.The LAN module is replaced by a Etherboot module that works better than the original one and will allow you boot from a DHCP Server. Works also smarter and accesses the network faster.
2.CPU Read & Write Pipelines enabled, as well as a few other personal adjustments.
3.Bus Disconnect aka Halt@Idle enabled (Reduces the Idle temp and also the power consumption).
BIOS 2.20a
1. Performance BIOS with bugfixes and USB patch.
NOTES:
1. Press TAB toggle once to bypass the Full Screen Logo ;-)
2. If the MAC addres of the onboard LAN is lost when flashing this (or any other) BIOS you can use the files in the MAC-fix folder to recover it (follow the instructions contained in the readme.txt).

Download:
Mirrror: http://www.chilis-home.de/filearea/inc/visit-245.html

- ASRock K7S8X-E+ Bios 1.48 "Cool-Bios"
Bios 1.48 Geekster based on 1.44P by guni & honey-x!
1.The LAN module is replaced by a Etherboot module that works better than the original one and will allow you boot from a DHCP Server. Works also smarter and accesses the network faster.
2.CPU Read & Write Pipelines enabled, as well as a few other personal adjustments.
3.SATA module updated to the newest one.
4.Bus Disconnect aka Halt@Idle enabled.( Reduces the Idle temp and also the power consumption.)

Download:
Mirrror: http://www.chilis-home.de/filearea/inc/visit-247.html

- ASRock K7S8X-E BIOS 1.40a "Cool-Version"
1.40AG / 1.40AGL: K7S8XE Cool!BIOS 1.40a by honey X & guni (based on 1.40a Beta Performance)
G = Geekster BIOS
GL = Geekster BIOS with Full Screen Logo
1.The LAN module is replaced by a Etherboot module that works better than the original one and will allow you boot from a DHCP Server. Works also smarter and accesses the network faster.
2.CPU Read & Write Pipelines enabled, as well as a few other personal adjustments.
3.Bus Disconnect aka Halt@Idle enabled (Reduces the Idle temp and also the power consumption).

Download:
Mirrror: http://www.chilis-home.de/filearea/inc/visit-246.html


N.B.: Questi Bios non sono supportati da Asrock.

Giorgius
21-03-2004, 15.20.06
Up! :)